Windows 10 is an amazing operating system with a ton of features. However, like all other operating systems, it is not without its fair share of errors. One such error is the “DNS server not responding” error.
This error can be caused by a number of things, including a problem with your DNS server, a problem with your network adapter, or a problem with your firewall.
Fortunately, there are a number of ways to fix this error. The following are some of the most common methods:
Method 1: Change your DNS server
One way to fix the “DNS server not responding” error is to change your DNS server. To do this, follow these steps:
1. Open the Control Panel.
2. Click on the Network and Sharing Center.
3. Click on the Change adapter settings link.
4. Right-click on your network adapter and select Properties.
5. Select the Internet Protocol Version 4 (TCP/IPv4) option and click on the Properties button.
6. Select the Use the following DNS server addresses option and enter the following addresses:
Preferred DNS server: 8.8.8.8
Alternate DNS server: 8.8.4.4
7. Click on the OK button and then the Close button.
Method 2: Update your network adapter driver
If you are having problems with your network adapter driver, you can try updating it. To do this, follow these steps:
1. Open the Control Panel.
2. Click on the Device Manager link.
3. Expand the Network adapters category.
4. Right-click on your network adapter and select Update driver.
5. Select the Search automatically for updated driver software option.
6. Click on the Search button.
7. Windows will search for the latest driver for your network adapter.
8. If a newer driver is found, Windows will install it automatically.
Method 3: Disable your firewall
If you are having problems with your firewall, you can try disabling it. To do this, follow these steps:
1. Open the Control Panel.
2. Click on the Windows Firewall link.
3. Click on the Turn Windows Firewall on or off link.
4. Select the Turn off Windows Firewall (not recommended) option and click on the OK button.
5. Click on the OK button and then the Close button.
Contents
How do I fix my DNS server problem?
If you’re having trouble connecting to the internet, one possible culprit is a malfunctioning DNS server. This article will show you how to troubleshoot and fix this problem.
First, try resetting your router. This can often fix DNS server problems. If that doesn’t work, check to make sure that your DNS server settings are correct. If they are, check your internet connection to make sure that it’s functioning properly. If it is, try resetting your modem. If that still doesn’t fix the problem, you may need to call your ISP for help.
What causes a DNS server error?
A Domain Name System (DNS) server error is a problem that can occur when you are trying to connect to the internet or to a network. This type of error can cause you to be unable to access the internet or to connect to a network.
There are many different things that can cause a DNS server error. One common cause is a problem with your internet service provider (ISP). If your ISP is having problems, you may experience a DNS server error.
Another common cause of DNS server errors is a problem with your computer’s network settings. If your computer is not configured to use the correct DNS servers, you may experience a DNS server error.
There are also many different things that can cause a DNS server error to occur. If you are experiencing a DNS server error, there are several things that you can do to troubleshoot the problem.
The first thing that you should do is check your internet connection. Make sure that your computer is connected to the internet and that your modem is turned on.
If you are using a wireless connection, make sure that your wireless router is turned on and that your computer is connected to the wireless network.
If you are using a wired connection, make sure that the cable is properly connected to your computer and to your modem.
If your internet connection is working properly, the next thing that you should do is check your computer’s network settings.
To check your computer’s network settings, open the Control Panel and click on the Network and Sharing Center.
In the Network and Sharing Center, click on the Change Adapter Settings link.
In the Network Connections window, right-click on your network adapter and select Properties.
In the Properties window, click on the Internet Protocol Version 4 (TCP/IPv4) and then click on the Properties button.
In the TCP/IPv4 Properties window, make sure that the Use the Following DNS Servers is selected and type the following DNS server addresses into the boxes:
Preferred DNS server: 8.8.8.8
Alternate DNS server: 8.8.4.4
Click on the OK button and then click on the Close button.
If your computer’s network settings are correct, the next thing that you should do is contact your ISP.
Your ISP may be able to help you troubleshoot the problem. They may also be able to provide you with a new DNS server address.
If you are still experiencing a DNS server error, there are several things that you can do to fix the problem.
One thing that you can try is to flush your computer’s DNS cache. To flush your computer’s DNS cache, open the Command Prompt and type the following command:
ipconfig /flushdns
Click on the OK button and then restart your computer.
If this does not fix the problem, you may need to reset your modem and your router.
If you are still experiencing a DNS server error, the last thing that you can do is to contact your ISP’s technical support.
How do I update my DNS driver?
Updating your DNS driver is a relatively simple process, though the specific steps involved may vary depending on your operating system and driver version. In general, you will need to find the driver’s installation file and uninstall the old driver before installing the new one.
First, find the driver’s installation file. This should be a file with a “.exe” or “.zip” extension, and it will typically be located in the “Drivers” or “Downloads” folder on your computer. Once you have located the installation file, open it and follow the on-screen instructions to uninstall the old driver.
Next, install the new driver. This should be a file with a “.exe” or “.zip” extension, and it will typically be located in the “Drivers” or “Downloads” folder on your computer. Once you have installed the new driver, restart your computer and check to see if the update was successful.
How do I clear my DNS cache?
There are a few ways to clear your DNS cache, depending on your operating system.
On Windows, you can clear the DNS cache by opening the command prompt and running the “ipconfig /flushdns” command.
On Mac OS X, you can clear the DNS cache by opening the Terminal and running the “dscacheutil -flushcache” command.
On Linux, you can clear the DNS cache by running the “sudo /etc/init.d/nscd restart” command.
How do I find my DNS server?
There are a few ways to determine your DNS server.
One way is to check your network settings. To do this, open the Control Panel and select Network and Internet. Select Network and Sharing Center, and then select Change Adapter Settings. Select the active network adapter, and then select Properties. Select Internet Protocol Version 4 (TCP/IPv4), and then select Properties. The DNS server is listed under the Preferred DNS server.
Another way to determine your DNS server is to use the command prompt. To do this, open the command prompt and type ipconfig /all. The DNS server is listed under the Default Gateway.
Finally, you can use a third-party tool to determine your DNS server. One popular tool is DNS Jumper. This tool allows you to select a DNS server from a list of popular servers.
How do I check DNS problems?
There are many reasons why you might experience problems with your DNS. In this article, we’ll walk you through some of the most common DNS issues and show you how to troubleshoot them.
One of the most common DNS problems is caused by a corrupted DNS cache. If your computer is having trouble connecting to websites, the first thing you should try is clearing your DNS cache. To do this, open a Command Prompt window and run the following command:
ipconfig /flushdns
If this command doesn’t fix the problem, you might need to reset your DNS settings. To do this, open the Network Connections window and select your network adapter. In the Properties window, select the Internet Protocol (TCP/IP) tab and click the Properties button. In the new window, select the Use the following DNS server addresses radio button and enter the following addresses:
Preferred DNS server: 8.8.8.8
Alternate DNS server: 8.8.4.4
If you’re still having problems connecting to websites, the problem might be with your DNS server. To troubleshoot this, you can use the ping command to test the connection. To do this, open a Command Prompt window and run the following command:
ping google.com
If you’re able to ping Google.com, the problem is with your DNS server. If you’re not able to ping Google.com, the problem is with your network or your computer.
If you’re having problems connecting to specific websites, the problem might be with your DNS server’s cache. To troubleshoot this, you can use the dig command to test the cache. To do this, open a Command Prompt window and run the following command:
dig google.com
If you’re able to dig Google.com, the problem is with your DNS server’s cache. If you’re not able to dig Google.com, the problem is with your network or your computer.
If you’re having problems connecting to websites that use HTTPS, the problem might be with your SSL certificate. To troubleshoot this, you can use the openssl command to test the certificate. To do this, open a Command Prompt window and run the following command:
openssl s_client -connect google.com:443
If you’re able to connect to Google.com using HTTPS, the problem is with your SSL certificate. If you’re not able to connect to Google.com using HTTPS, the problem is with your network or your computer.
If you’re having problems connecting to websites that use IPv6, the problem might be with your IPv6 settings. To troubleshoot this, you can use the ipconfig command to test the settings. To do this, open a Command Prompt window and run the following command:
ipconfig /all
If you’re able to connect to websites that use IPv6, the problem is with your IPv6 settings. If you’re not able to connect to websites that use IPv6, the problem is with your network or your computer.
If you’re having problems connecting to websites, the problem might be with your firewall. To troubleshoot this, you can use the netsh command to test the firewall. To do this, open a Command Prompt window and run the following command:
netsh firewall show state
If the firewall is enabled, the problem is with your firewall. If the firewall is disabled, the problem is with your network or your computer.
If you’re having problems connecting to websites, the problem might be with your proxy server
How do I reset DNS settings in Windows 10?
DNS (Domain Name System) is a system that translates domain names into IP addresses. It is used to find the addresses of websites and other resources on the internet.
If you are having problems connecting to the internet, or if you are having problems with specific websites, it may be because your DNS settings are incorrect. You can reset your DNS settings in Windows 10 by following these steps:
1. Open the Settings app and go to Network & Internet.
2. Click on Network and Sharing Center.
3. Click on Change adapter settings.
4. Right-click on your network adapter and select Properties.
5. Select the IPv4 Properties tab and click on the Properties button.
6. Select the DNS tab and click on the Properties button.
7. Select the Use the following DNS server addresses radio button and enter the following DNS server addresses:
8. Click on the OK button.
9. Close the Properties window.
10. Restart your computer.