What is the F21 error code on a washing machine?
The F21 error code on a washing machine usually means that there is a water leak somewhere in the machine.
How can I fix the F21 error code on my washer?
If you have an F21 error code on your washer, you will need to fix the water leak before you can use the machine again.
Where can I find the F21 error code on my washer?
The F21 error code is usually displayed on the washer’s control panel.
Contents
- 1 How do I reset the F21 code on my washing machine?
- 2 How do you clear F21 code on Whirlpool Duet washer?
- 3 Where is the drain hose on a washer?
- 4 How do I fix error code F21 on Kenmore?
- 5 How do I fix a Whirlpool washer drain error?
- 6 What causes washer not to drain?
- 7 How do I know if my drain hose is clogged?
How do I reset the F21 code on my washing machine?
If your washing machine is displaying an F21 code, it means that there is a problem with the water level sensor. This sensor is responsible for detecting the level of water in the washing machine tub, and if it becomes damaged or dirty, it can cause the F21 code to appear.
There are a few things that you can do to try to reset the F21 code on your washing machine. First, make sure that the water level sensor is clean and free of any debris. You can do this by using a brush or a vacuum to clean it off. If the sensor is still not working correctly, you may need to replace it.
If you are unable to reset the F21 code on your washing machine, you may need to contact a technician for assistance.
How do you clear F21 code on Whirlpool Duet washer?
How do you clear F21 code on Whirlpool Duet washer?
If you’re seeing an F21 code on your Whirlpool Duet washer, it means that the washer is having trouble draining. This can be caused by a number of issues, including a clogged drain hose, a clogged pump, or a clogged filter.
To clear the F21 code and try to fix the drainage issue, you’ll need to perform a few troubleshooting steps. First, check to see if the drain hose is clogged. If it is, clear the clog and restart the washer. If the clog is not the issue, move on to the pump.
The pump can be cleared of any clogs by performing a manual pump test. To do this, unplug the washer and remove the console. Locate the pump and remove the cover. Check to see if there is any debris inside the pump and remove it if there is. Replace the cover and reattach the console.
If the pump is not the issue, the filter may be clogged. To clear the filter, unplug the washer and remove the console. Locate the filter and remove it. Check to see if there is any debris inside the filter and remove it if there is. Replace the filter and reattach the console.
If the code persists after performing these troubleshooting steps, there may be a more serious issue with the washer and you’ll need to contact a technician for further assistance.
Where is the drain hose on a washer?
Where is the drain hose on a washer?
The drain hose on a washer is typically located on the bottom front of the machine. It is a black rubber hose that is attached to a metal clip. The hose is used to drain the water from the washer.
How do I fix error code F21 on Kenmore?
If your Kenmore washer is displaying an error code of F21, it means that there is a water temperature sensor issue. This sensor is responsible for monitoring the water temperature and sending that information to the washer’s computer. If there is a problem with the sensor, the washer will not be able to operate properly.
There are a few things that you can do to try to fix this problem. The first thing is to check the water temperature. If the water is too hot or too cold, the sensor will not be able to function properly. You can try to adjust the water temperature to see if that fixes the issue.
If the water temperature is correct, the next step is to check the wiring on the water temperature sensor. If the wiring is damaged or if there is any corrosion on the connectors, it can cause the sensor to malfunction. You can try to clean the connectors and repair the wiring if necessary.
If the water temperature sensor is still not working properly, you may need to replace it. You can purchase a new water temperature sensor online or at a hardware store. Once you have the new sensor, you can replace it yourself or have a professional install it for you.
If you are experiencing an F21 error code on your Kenmore washer, try the steps listed above to see if you can fix the problem. If those steps do not work, you may need to replace the water temperature sensor.
How do I fix a Whirlpool washer drain error?
If your Whirlpool washer is giving you a drain error, there are a few things you can try to fix it. The first step is to make sure that the drain hose is properly attached to the washer and the drain pipe. If the hose is loose, it can cause the washer to fill with water and not drain properly.
If the hose is properly attached, the next thing to check is the drain pump. The pump may be clogged or dirty, preventing the washer from draining properly. To clean the pump, unplug the washer and remove the cover from the back. The pump is located in the lower right-hand corner. Remove the pump and clean it with a brush or a vacuum cleaner.
If the pump is clean and the hose is attached properly, the next step is to check the drain valve. The drain valve may be clogged or dirty, preventing the washer from draining properly. To clean the valve, unplug the washer and remove the cover from the back. The valve is located in the lower left-hand corner. Remove the valve and clean it with a brush or a vacuum cleaner.
If the valve is clean and the hose is attached properly, the next step is to check the water level switch. The water level switch may be clogged or dirty, preventing the washer from draining properly. To clean the switch, unplug the washer and remove the cover from the back. The switch is located in the upper right-hand corner. Remove the switch and clean it with a brush or a vacuum cleaner.
If the switch is clean and the hose is attached properly, the next step is to check the motor. The motor may be clogged or dirty, preventing the washer from draining properly. To clean the motor, unplug the washer and remove the cover from the back. The motor is located in the upper left-hand corner. Remove the motor and clean it with a brush or a vacuum cleaner.
If the motor is clean and the hose is attached properly, the next step is to check the belt. The belt may be loose or broken, preventing the washer from draining properly. To check the belt, unplug the washer and remove the cover from the back. The belt is located in the center of the washer. Remove the belt and check it for wear or damage. If the belt is damaged, replace it.
If the belt is loose or broken, the next step is to check the motor coupler. The motor coupler may be loose or broken, preventing the washer from draining properly. To check the motor coupler, unplug the washer and remove the cover from the back. The motor coupler is located in the lower right-hand corner. Remove the motor coupler and check it for wear or damage. If the motor coupler is damaged, replace it.
If the motor coupler is loose or broken, the next step is to check the spin bearing. The spin bearing may be loose or broken, preventing the washer from draining properly. To check the spin bearing, unplug the washer and remove the cover from the back. The spin bearing is located in the upper right-hand corner. Remove the spin bearing and check it for wear or damage. If the spin bearing is damaged, replace it.
If the spin bearing is loose or broken, the next step is to check the transmission. The transmission may be loose or broken, preventing the washer from draining properly. To check the transmission, unplug the washer and remove the cover from the back. The transmission is located in the lower left
What causes washer not to drain?
There are a few reasons why your washer may not be draining properly. One common reason is a clog in the drain hose. If the hose is clogged, the water will back up into the washer. Another common reason is a clogged pump. If the pump is clogged, the water will not be able to drain out of the washer. A third common reason is a clogged filter. If the filter is clogged, the water will not be able to drain out of the washer. If your washer is not draining properly, check the hose, pump, and filter to see if they are clogged. If they are clogged, clear the clog and restart the washer.
How do I know if my drain hose is clogged?
There are a few ways to tell if your drain hose is clogged. One way is to check the water level in your dishwasher. If the water is not draining properly, the dishwasher will not be able to fill up with water and will not be able to clean your dishes. Another way to tell if your drain hose is clogged is to listen for a humming noise. If you hear a humming noise, it means that the dishwasher is trying to pump the water out but is not being successful. The final way to tell if your drain hose is clogged is to check the water in your sink. If the water in your sink is not draining properly, it means that your drain hose is clogged.