There are a few things that you can do in order to try and fix the F21 error code on your Maytag washer. The first is to try and reset the machine by unplugging it for a few minutes and then plugging it back in. If that doesn’t work, you can try cleaning the washer’s filters. The filters can be found at the bottom of the machine and can be cleaned with a brush or a vacuum. If that still doesn’t work, you may need to replace the water valve. The water valve can be accessed from the back of the machine and can be replaced with a few simple tools.
Contents
- 1 Why does my Maytag washer says F21?
- 2 How do I fix my F21 washer?
- 3 How do you force a Maytag washer to drain?
- 4 How do you fix Maytag washing machine that wont drain?
- 5 How do you reset the code on a Maytag washer?
- 6 Where is the drain pump filter on a Maytag washer?
- 7 How do I reset my Maytag front load washer?
Why does my Maytag washer says F21?
If your Maytag washer says F21, it means that the washer has detected an overfill condition. This is usually caused by an improper load size or an incorrect water level setting.
If your washer continues to say F21, you should stop the washer and unload it. Once you have unloaded the washer, you should check the load size and water level settings to make sure they are correct. You may also need to redistribute the clothes in the washer to ensure that they are not too tightly packed.
If your Maytag washer continues to say F21 after you have checked the load size and water level settings, you may need to call a technician to help solve the problem.
How do I fix my F21 washer?
If your F21 washer is not working properly, there are a few things you can do to try to fix it.
First, make sure that the washer is plugged in and that the power is on. Next, check to see if the water is turned on and that the hose is attached properly.
If the washer still isn’t working, try unplugging it and plugging it back in. If that doesn’t work, you may need to call a technician.
How do you force a Maytag washer to drain?
If your Maytag washer is not draining properly, you may need to force it to drain. This can be done by following a few simple steps.
First, locate the drain pump. It is located at the bottom of the washer. The drain pump is a small, square pump with a hose attached to it.
Next, unplug the washer.
Then, remove the hose from the drain pump.
Finally, plug the drain pump back in and restart the washer. The washer should now drain properly.
How do you fix Maytag washing machine that wont drain?
There are a few things that you can do if your Maytag washing machine is not draining properly. The first thing you should check is the filter. If the filter is clogged, it will prevent the machine from draining properly. You can clean the filter by removing it and rinsing it under running water.
If the filter is not the problem, you may need to unplug the machine and check the drain hose. The hose may be kinked or clogged. You can clear the hose by unplugging it and using a vacuum cleaner to suck out any debris.
If the hose is not the problem, the pump may be defective. You can test the pump by unplugging the machine and removing the pump cover. There should be a small hole in the cover. Plug the hole with your finger and start the machine. If the machine starts, the pump is working. If the machine does not start, the pump is defective and needs to be replaced.
How do you reset the code on a Maytag washer?
There are a few ways that you can reset the code on a Maytag washer. The most common way is to use the touchpad on the front of the washer. To do this, you will need to press and hold the cancel button for three seconds. Then, you will need to enter the code that is displayed on the washer’s screen. If you do not know the code, you can find it in the owner’s manual.
Another way to reset the code is to use the circuit breaker. To do this, you will need to locate the breaker panel and reset the breaker that is associated with the washer. If you are not sure which breaker is associated with the washer, you can find the code in the owner’s manual.
Finally, you can reset the code by unplugging the washer. To do this, you will need to locate the power cord and unplug it from the outlet. Once the cord is unplugged, you can wait a few minutes and then plug it back in. Once the washer is plugged back in, you can try to enter the code again.
Where is the drain pump filter on a Maytag washer?
The drain pump filter on a Maytag washer is located on the bottom front of the washer. It is a small, cylindrical filter with a small hole in the top. The filter is used to trap lint and other debris from the washer’s drain pump. If the filter becomes clogged, the drain pump may not be able to function properly and the washer may not drain properly.
How do I reset my Maytag front load washer?
When your Maytag front load washer isn’t working right, you may need to reset it. This process clears the washer’s memory and can fix certain problems.
To reset your Maytag front load washer, unplug it from the wall and wait for one minute. Plug it back in and press the power button to turn it on. When the washer starts up, press the pause/cancel button. This will clear the washer’s memory.