Skip to content
Any Error Fixed
Menu
  • Errors
Menu

How To Clear Drum Error On Brother Printer

Posted on September 1, 2022 by Emmitt Rodriguez

Are you getting a Drum Error message on your Brother printer? This can be frustrating, but don’t worry, there are a few things you can do to clear the error.

First, try turning your printer off and on again. If this doesn’t work, try unplugging your printer and plugging it back in.

If neither of these methods clears the error, you may need to replace the drum unit. This can be done by following these steps:

1. Open the front cover of your printer.

2. Remove the drum unit and toner cartridge from the printer.

3. Hold the new drum unit with the green arrow pointing up and slide the new toner cartridge into the drum unit.

4. Put the drum unit and toner cartridge back into the printer.

5. Close the front cover of the printer.

If you are still getting a Drum Error message after trying these steps, please contact Brother customer service.

Contents

  • 1 How do you clear a Brother drum error?
  • 2 Why does my Brother printer keep saying drum error?
  • 3 How do you reset the drum and toner on a Brother printer?
  • 4 How do I clear my drum End Soon message?
  • 5 What happens if I don’t replace printer drum?
  • 6 How do I reset my Brother printer?
  • 7 Do I really need to replace the drum on my Brother printer?

How do you clear a Brother drum error?

A Brother drum error can be caused by a number of different things, from a dirty drum to a damaged one. In this article, we’ll walk you through the process of clearing a Brother drum error so that you can get your printer back up and running.

The first thing you’ll need to do is make sure that the drum is actually the problem. To do this, you’ll need to print a test page. If the test page prints correctly, then the problem is likely not the drum. If the test page doesn’t print correctly, then you’ll need to replace the drum.

Once you’ve determined that the problem is the drum, you’ll need to clear the error. To do this, you’ll need to open the printer cover and locate the drum. You’ll then need to press the release button on the side of the drum, and pull the drum out of the printer.

You’ll then need to hold the drum so that the toner cartridge is facing down, and give it a gentle shake. This will help loosen any toner that may be stuck in the cartridge. You can then reinsert the drum into the printer, and close the cover.

You should then try to print a test page to see if the error has been cleared. If it has, then you’re good to go. If the error persists, then you’ll need to replace the drum.

Read also  Google Voice Sign In Error

Why does my Brother printer keep saying drum error?

If your Brother printer is displaying an error message that reads “Drum Error,” don’t panic. This message simply means that the printer has detected a problem with the drum unit. The good news is that this issue is typically easy to fix, and most likely doesn’t require the services of a professional.

There are a few things you can do to try and fix a “Drum Error” on your Brother printer. One thing you can try is to clean the drum unit. This can be done by gently wiping it down with a soft, lint-free cloth. Be sure to avoid getting any type of liquid or solvent on the drum unit, as this could damage it.

Another thing you can try is to reset the printer. This can be done by pressing and holding the “Menu” and “Clear” buttons on the printer for about five seconds. Once the printer has been reset, try printing again.

If you’ve tried both of these things and the “Drum Error” message continues to appear, it may be time to replace the drum unit. This can be a relatively inexpensive fix, and can usually be done by the user without the help of a professional.

Hopefully one of these tips will fix the “Drum Error” message on your Brother printer. If not, or if you have any other questions, be sure to contact Brother customer service for assistance.

How do you reset the drum and toner on a Brother printer?

Resetting the drum and toner on a Brother printer is a fairly easy process that can be completed in a few minutes. The first step is to make sure that the printer is turned off and unplugged from the wall. Once it is unplugged, open the front cover of the printer and locate the two drums – the black one is the toner cartridge, and the silver one is the imaging drum.

Next, locate the reset button on the side of the toner cartridge and use a pen or paperclip to press it in. Hold the button down for a few seconds, then release it. Finally, locate the reset button on the side of the imaging drum and use a pen or paperclip to press it in. Hold the button down for a few seconds, then release it.

After the reset buttons have been pressed, plug the printer back in and turn it on. The printer should start printing a calibration page, which will help to ensure that the print quality is back to normal.

Read also  How To Fix Error Code 20006 Fortnite

How do I clear my drum End Soon message?

If you’re seeing a Drum End Soon message on your printer, it means that the printer is almost out of ink and will need to be replaced soon. You can clear the message by pressing the Resume button on the printer, but you’ll still need to replace the ink cartridge soon.

What happens if I don’t replace printer drum?

Printers are a necessary evil in the modern world. No matter how hard we try to go paperless, there always seems to be a need for hard copies of documents. And, of course, that means printers.

But what happens if you don’t replace the printer drum? Unfortunately, the consequences can be pretty dire. Here’s a look at what can happen if you don’t replace your printer drum.

1. Your printer might not work at all.

One of the most common consequences of not replacing a printer drum is that the printer simply won’t work at all. This is because the drum is responsible for transferring the image from the computer to the paper, and if it’s not working properly, the printer won’t be able to do its job.

2. The print quality will be poor.

Another common consequence of not replacing a printer drum is poor print quality. This is because the drum is responsible for ensuring that the ink is properly transferred to the paper. If the drum is old or damaged, the print quality will be poor.

3. The printer might overheat.

If the printer drum isn’t replaced, the printer might overheat. This is because the drum is one of the most important components of the printer, and if it’s not working properly, the printer will have to work a lot harder to do its job. This can cause the printer to overheat, which can be dangerous.

4. The printer might break down.

If the printer drum isn’t replaced, the printer might eventually break down. This is because the drum is a critical component of the printer, and if it’s not working properly, the printer will eventually wear out.

5. The printer might produce inaccurate prints.

If the printer drum isn’t replaced, the printer might produce inaccurate prints. This is because the drum is responsible for transferring the image correctly from the computer to the paper. If the image isn’t transferred correctly, the prints might be inaccurate.

6. The printer might jam.

If the printer drum isn’t replaced, the printer might jam. This is because the drum is responsible for feeding the paper into the printer. If the drum is old or damaged, the paper might not be fed into the printer correctly, which can cause the printer to jam.

Read also  How To Fix Error Code 4 Warzone Xbox

7. The printer might leak ink.

If the printer drum isn’t replaced, the printer might leak ink. This is because the drum is responsible for storing the ink until it’s transferred to the paper. If the drum is old or damaged, the ink might leak out, which can be messy and dangerous.

So, as you can see, there are a lot of consequences of not replacing a printer drum. If you’re overdue for a new printer drum, be sure to replace it as soon as possible. Otherwise, you might end up with a printer that doesn’t work at all.

How do I reset my Brother printer?

Resetting your Brother printer is a simple process that can be completed in a few minutes. This article will provide you with instructions on how to reset your Brother printer.

First, make sure that your printer is turned on and connected to your computer. Next, open the Brother Control Center. You can do this by clicking on the Brother Control Center icon in your system tray (near the clock on your desktop), or by opening the Start menu and selecting Programs > Brother > Brother Control Center.

In the Brother Control Center, click on the Maintenance tab, and then click on the Reset printer button. A dialog box will appear asking you to confirm your decision. Click on the Yes button to reset your printer.

Your printer will now be reset to its factory defaults.

Do I really need to replace the drum on my Brother printer?

Brother printers are known for their quality and durability, but even the best machines eventually need some repairs. If you’re wondering whether or not you need to replace the drum on your Brother printer, read on for some helpful information.

The drum is the part of the printer that actually prints the image or text on the page. It’s a critical component, and over time it will eventually wear out. When the drum starts to wear out, you’ll start to see streaks or blotches on your printed pages.

If you’re seeing these symptoms, it’s definitely time to replace the drum. You can purchase a new drum online or from your local Brother dealer. It’s a quick and easy process, and it will help your printer to run like new again.

So, do you really need to replace the drum on your Brother printer? The answer is definitely yes – it’s a necessary part of the printer that will eventually wear out. Thankfully, it’s an easy and affordable process to replace it.

Runtime Errors
Syntax Errors
Logic Errors
Runtime Exceptions
BSOD Errors
DLL Errors

Recent Posts

  • How To Write An Error Analysis
  • How To Tell If Standard Error Is Significant
  • How To Throw Error In Javascript
  • How To Stop Windows Error Reporting
  • How To Throw An Error In Java
  • How To Throw Error C
  • How To Throw An Error In Python
  • How To Stop Script Error Messages
  • How To Turn Off Movement Error Csgo
  • How To Turn Off Firing Error Csgo
  • How To Solve Error Function
  • How To Stop Sign In Error On Android
  • How To Solve 403 Forbidden Error In WordPress
  • How To Solve 403 Forbidden Error
  • How To Use Standard Error
  • How To Return Stimulus Check Received In Error
  • How To Restart Canon Camera Lens Error
  • How To Resolve 301 Moved Permanently Error
  • How To Reset Kubota Error Codes
  • How To Repair Hard Disk Error
  • How To Stop Dev Error Modern Warfare Xbox
  • How To Reset Error Code On Maytag Washer
  • How To Stop Internet Explorer Script Error Messages
  • How To Score An Error In Baseball
  • How To Remove Script Error Pop Up
  • How To Remove Google 404 Error
  • How To Get Rid Of Script Error
  • How To Get Standard Error In R
  • How To Remove Script Error Message
  • How To Fix Youtube Error
Privacy Policy | Terms of Use | California Consumer Privacy Act | DMCA

Copyright © AnyerrorFixed All Rights Reserved