When installing GRUB on a computer that uses UEFI, it’s possible to receive the error “cannot find EFI”. This error can be caused by several things, including a misconfigured boot order, a missing EFI system partition, or a corrupted EFI.
If you’re receiving the “cannot find EFI” error, there are a few things that you can do to troubleshoot and fix the issue. First, make sure that you’ve correctly configured your boot order. If you’re not sure how to do this, consult your computer’s documentation or manufacturer.
If you’ve checked your boot order and it’s configured correctly, then you may need to create an EFI system partition. An EFI system partition is a small partition on your hard drive that stores the boot files for UEFI systems. If your computer doesn’t have an EFI system partition, you’ll need to create one.
To create an EFI system partition, you’ll need to use a third-party tool, such as the EFI System Partition Editor. Once you’ve created the EFI system partition, make sure that it’s mounted and active.
If you’ve checked your boot order and created an EFI system partition, but you’re still receiving the “cannot find EFI” error, then your EFI may be corrupted. In this case, you’ll need to reinstall your EFI.
If you’ve tried all of these troubleshooting steps and you’re still receiving the “cannot find EFI” error, then your computer may not be compatible with UEFI. In this case, you may need to disable UEFI and install GRUB in BIOS mode.
Contents
Where is Grub install EFI?
Grub is the bootloader most commonly used on Linux systems. It is a free and open source project that is distributed under the GNU General Public License. Grub can be used to boot Linux operating systems as well as other operating systems such as Windows and Mac OS.
Grub can be installed in two ways – in BIOS mode or in EFI mode. In BIOS mode, Grub is installed in the Master Boot Record (MBR) of the hard drive. In EFI mode, Grub is installed in the EFI System Partition (ESP).
Where is Grub install EFI?
If you are installing Grub in EFI mode, the Grub install location will depend on your particular system configuration. If you are using a BIOS system, Grub will be installed in the MBR of the hard drive. If you are using a UEFI system, Grub will be installed in the ESP.
If you are not sure which mode your system is using, you can check by running the following command:
sudo efibootmgr -v
This will print a list of bootable devices on your system. If you see a line that says “EFI Boot”, then your system is using UEFI. If you don’t see a line that says “EFI Boot”, then your system is using BIOS.
How to install Grub in EFI mode
If you want to install Grub in EFI mode, you will need to create an EFI System Partition (ESP) on your hard drive. This can be done using the following command:
sudo parted -s /dev/sda mklabel msdos
This will create a new partition on your hard drive that is formatted as FAT32. You can then install Grub to this partition using the following command:
sudo grub-install –target=x86_64-efi –efi-directory=/boot –bootloader-id=grub
Note that the “–efi-directory” option specifies the location of the Grub files on the partition. You may need to change this depending on your system configuration.
If you are using a Linux system, you can also create an ESP using the “gdisk” tool. For more information, see the following link:
https://wiki.archlinux.org/index.php/GUID_Partition_Table#Creating_an_EFI_System_Partition
How to install Grub in BIOS mode
If you want to install Grub in BIOS mode, you will need to install it in the MBR of the hard drive. This can be done using the following command:
sudo grub-install –boot-directory=/boot /dev/sda
Note that the “–boot-directory” option specifies the location of the Grub files on the partition. You may need to change this depending on your system configuration.
What is EFI directory in Linux?
The EFI directory is a directory in the Linux operating system that is used to store files that are related to the EFI firmware. This directory is located in the /sys/firmware/efi directory. The files that are stored in this directory are used to configure and manage the EFI firmware.
The EFI directory contains the following files:
– boot-efi: This file contains the boot loader for the EFI firmware.
– cpu-info: This file contains information about the CPU type and features.
– device-tree: This file contains the device tree for the EFI firmware.
– firmware: This file contains the firmware image for the EFI firmware.
– graphics: This file contains information about the graphics mode for the EFI firmware.
– memory: This file contains information about the memory layout for the EFI firmware.
– oem-data: This file contains OEM-specific data for the EFI firmware.
– pci: This file contains information about the PCI devices for the EFI firmware.
– power: This file contains information about the power management features for the EFI firmware.
– smbios: This file contains information about the SMBIOS type for the EFI firmware.
– system-config: This file contains information about the system configuration for the EFI firmware.
The EFI directory can be used to configure the following features:
– The boot order of the devices that are used to boot the system.
– The graphics mode that is used by the system.
– The memory layout of the system.
– The power management features of the system.
– The SMBIOS type of the system.
– The system configuration.
How do I manually install GRUB bootloader?
GRUB, or the GRand Unified Bootloader, is a free and open source bootloader that is used by many distributions of Linux. It is responsible for loading the kernel and initial ramdisk of the operating system. GRUB can be installed manually, or it can be installed automatically by a distribution’s installer.
If you need to install GRUB manually, there are a few steps that you will need to take. The first step is to download the GRUB files. You can find these files on the GRUB website. Once you have downloaded the files, you will need to extract them. To do this, open a terminal and cd to the directory where you downloaded the files. Then, run the following command:
tar -xzvf grub-2.xx.tar.gz
This will extract the files from the tarball. Next, you will need to create a configuration file. This file will tell GRUB how to load the kernel and initial ramdisk. To create the file, run the following command:
grub-mkconfig -o /boot/grub/grub.cfg
This will create the file /boot/grub/grub.cfg. The last step is to install GRUB. To do this, run the following command:
grub-install /dev/sdx
Replace /dev/sdx with the device name of the disk where you want GRUB to be installed. For example, if you want GRUB to be installed on the disk /dev/sda, run the following command:
grub-install /dev/sda
If you are using a BIOS system, you will need to run the following command:
grub-install –boot-directory=/boot /dev/sda
If you are using a UEFI system, you will need to run the following command:
grub-install –boot-directory=/boot/efi /dev/sda
Once GRUB is installed, you will be able to boot your system.
Is Grub needed with UEFI?
UEFI, or Unified Extensible Firmware Interface, is a specification for a modernized, more secure firmware interface for personal computers. Grub is a bootloader, which is software that starts up your computer after it is turned on. So, the question is, do you need Grub with UEFI?
The answer is, it depends. If your computer already has a working operating system installed, and you don’t want to change anything, then you don’t need Grub. However, if you want to install a new operating system, or you want to change your current operating system, then you will need Grub.
Grub is the most common bootloader for Linux systems. If you are using a Linux-based operating system, then you will need Grub to boot your computer. Windows also has a built-in bootloader, called NTLDR. If you are using a Windows-based operating system, then you will not need Grub.
There are two main types of UEFI firmware: UEFI-mode and Compatibility-mode. UEFI-mode is the newer, more secure firmware interface. Compatibility-mode is the older, less secure firmware interface. If your computer is using Compatibility-mode firmware, then you will need Grub to boot your computer. If your computer is using UEFI-mode firmware, then you will not need Grub.
Most computers that come with Windows 8 or 10 pre-installed are using UEFI-mode firmware. If you are using one of these computers, then you will not need Grub. If you are using a computer that is using Compatibility-mode firmware, then you will need Grub to boot your computer.
So, to sum it up, if you are using a computer that is already running an operating system, and you don’t want to change anything, then you don’t need Grub. If you want to install a new operating system, or you want to change your current operating system, then you will need Grub. If your computer is using Compatibility-mode firmware, then you will need Grub to boot your computer. If your computer is using UEFI-mode firmware, then you will not need Grub.
How do I reinstall EFI?
There are a few different ways to reinstall EFI, depending on your computer’s configuration. If you are not sure how to do it, or if you run into any problems, you can consult your computer’s manual, or contact the manufacturer for support.
One way to reinstall EFI is to use the recovery mode on your computer. To do this, restart your computer and press the F8 key repeatedly until you see the Advanced Boot Options menu. From there, select Repair Your Computer, and then follow the on-screen instructions.
Another way to reinstall EFI is to use a USB recovery drive. To create a USB recovery drive, you will need a USB flash drive with at least 8GB of storage space, and the Windows 10 installation files. To create the recovery drive, open File Explorer, right-click the USB flash drive, and select Format. From the Format menu, select the Create a recovery drive option.
Next, open the Control Panel, and select Recovery. Under the Advanced startup section, click the Restart now button. Your computer will restart and you will see the Choose an option menu. From there, select Troubleshoot, and then select Advanced options. Next, select UEFI Firmware Settings, and then click the Restart button.
Your computer will restart and you will see the UEFI Firmware Settings screen. From there, select the Restore factory defaults option, and then click the Save changes and exit button. Your computer will restart and you will see the Windows 10 installation screen. Follow the on-screen instructions to install Windows 10.
How do I fix grub installation?
There are a few different ways that you can go about fixing your grub installation. In this article, we will go over the most common ways to do so.
If you are having problems with your grub installation, there are a few things that you can do to try and fix it. The first thing you should do is to try and reinstall grub. To do this, you will need to boot into your live cd or usb drive. Once you are booted in, you will need to run the following command:
sudo grub-install /dev/sda
This will install grub onto your hard drive. If this command does not work, you may need to try a different method.
One way to fix grub is to use the boot repair tool. This tool can be used to fix a number of different boot problems, including problems with grub. To use the boot repair tool, you will need to boot into your live cd or usb drive. Once you are booted in, you will need to run the following command:
sudo boot-repair
This will open the boot repair tool. From there, you will be able to fix any problems that you are having with your grub installation.
Another way to fix grub is to use the grub shell. To do this, you will need to boot into your live cd or usb drive. Once you are booted in, you will need to run the following command:
sudo grub-shell
This will open the grub shell. From there, you will be able to fix any problems that you are having with your grub installation.
If you are having problems with your grub installation, there are a few things that you can do to try and fix it. The first thing you should do is to try and reinstall grub. To do this, you will need to boot into your live cd or usb drive. Once you are booted in, you will need to run the following command:
sudo grub-install /dev/sda
This will install grub onto your hard drive. If this command does not work, you may need to try a different method.
One way to fix grub is to use the boot repair tool. This tool can be used to fix a number of different boot problems, including problems with grub. To use the boot repair tool, you will need to boot into your live cd or usb drive. Once you are booted in, you will need to run the following command:
sudo boot-repair
This will open the boot repair tool. From there, you will be able to fix any problems that you are having with your grub installation.
Another way to fix grub is to use the grub shell. To do this, you will need to boot into your live cd or usb drive. Once you are booted in, you will need to run the following command:
sudo grub-shell
This will open the grub shell. From there, you will be able to fix any problems that you are having with your grub installation.
How do I reinstall grub?
If you’re having trouble with Grub, the GNU GRand Unified Bootloader, there are a few ways you can try to fix it. One way is to reinstall Grub.
To reinstall Grub, you’ll need to have a Live CD or USB drive with an operating system on it, such as Ubuntu. Then, you can use that operating system to run some commands that will reinstall Grub.
First, you’ll need to open a terminal. On Ubuntu, you can do this by pressing Alt+F2 and typing ‘terminal’ into the box that appears.
Then, you’ll need to mount your Live CD or USB drive. To do this, type ‘sudo mkdir /mnt/cdrom’ (or ‘sudo mkdir /mnt/usb’) and press Enter.
Next, you’ll need to mount your Live CD or USB drive. To do this, type ‘sudo mount /dev/cdrom /mnt/cdrom’ (or ‘sudo mount /dev/usbstick /mnt/usb’) and press Enter.
Now, you can type ‘sudo grub-install –root-directory=/mnt/cdrom /dev/sdX’ (or ‘sudo grub-install –root-directory=/mnt/usb /dev/sdX’) and press Enter.
Replace ‘sdX’ with the letter of your device. For example, if your Live CD or USB drive is on /dev/sdc, you would type ‘sudo grub-install –root-directory=/mnt/cdrom /dev/sdc’ and press Enter.
If you have more than one operating system installed on your computer, you may need to type ‘sudo grub-install –root-directory=/mnt/cdrom –recheck /dev/sdX’ (or ‘sudo grub-install –root-directory=/mnt/usb –recheck /dev/sdX’) and press Enter.
If you’re using Windows, you may need to type ‘sudo grub-install –root-directory=/mnt/cdrom –boot-directory=/mnt/cdrive/boot –recheck /dev/sdX’ (or ‘sudo grub-install –root-directory=/mnt/usb –boot-directory=/mnt/cdrive/boot –recheck /dev/sdX’) and press Enter.
Replace ‘sdX’ with the letter of your device. For example, if your Live CD or USB drive is on /dev/sdc, you would type ‘sudo grub-install –root-directory=/mnt/cdrom –boot-directory=/mnt/cdrive/boot –recheck /dev/sdc’ and press Enter.
If you have any questions, you can type ‘man grub-install’ into the terminal for more information.