If you’re experiencing problems with your Fisher & Paykel dishwasher, it may display an error code. These codes can help you troubleshoot the issue and fix it.
Below are some of the most common Fisher & Paykel dishwasher error codes, along with their meanings and solutions:
E1: This code indicates that there is a problem with the water supply. Check to make sure that the dishwasher is properly connected to the water supply and that the water is turned on.
E2: This code means that there is a problem with the dishwasher’s drainage system. Check to make sure that the dishwasher is properly connected to the drainage system and that the drainage hose is not kinked or clogged.
E3: This code means that there is a problem with the dishwasher’s heating system. Check to make sure that the dishwasher is properly connected to the electrical supply and that the dishwasher is not overloaded.
E4: This code means that there is a problem with the dishwasher’s motor. Check to make sure that the dishwasher is properly connected to the electrical supply and that the dishwasher is not overloaded.
E5: This code means that there is a problem with the water temperature. Check to make sure that the dishwasher is properly connected to the water supply and that the water is turned on.
E6: This code means that there is a problem with the dishwasher’s control panel. Check to make sure that the dishwasher is properly connected to the electrical supply.
E7: This code means that there is a problem with the dishwasher’s water pump. Check to make sure that the dishwasher is properly connected to the water supply and that the water is turned on.
E8: This code means that there is a problem with the dishwasher’s main control board. Check to make sure that the dishwasher is properly connected to the electrical supply.
E9: This code means that there is a problem with the dishwasher’s motor relay. Check to make sure that the dishwasher is properly connected to the electrical supply.
If you’re experiencing any other error codes, or if the solutions listed above don’t solve the problem, contact Fisher & Paykel’s customer service department for assistance.
Contents
- 1 How do I read a Fisher and Paykel error code?
- 2 Why is my Fisher and Paykel DishDrawer beeping?
- 3 How do I reset my Fisher and Paykel DishDrawer?
- 4 How do I fix f1 error on Fisher and Paykel DishDrawer?
- 5 How do you troubleshoot a Fisher Paykel washing machine?
- 6 How do I reset my Fisher Paykel washing machine?
- 7 How do you run a diagnostic on a Fisher Paykel dishwasher?
How do I read a Fisher and Paykel error code?
If you’re experiencing problems with your Fisher and Paykel dishwasher, you may see an error code displayed on the machine. While each error code is unique, they all indicate a specific problem that needs to be fixed. In this article, we’ll explain how to read Fisher and Paykel error codes and what you can do to fix the problem.
Fisher and Paykel dishwashers use an LED display to show error codes. The codes are listed in the user manual, but we’ll go over the most common ones here.
If the dishwasher doesn’t start, you’ll see an E1 error code. This code means that there is a problem with the water supply. Check to make sure the dishwasher is connected to a working water supply and that the water is turned on.
If the dishwasher doesn’t fill with water, you’ll see an E2 error code. This code means that there is a problem with the water inlet valve. Check to make sure the valve is connected to a working water supply and that the water is turned on.
If the dishwasher doesn’t drain, you’ll see an E3 error code. This code means that there is a problem with the drain pump. Check to make sure the dishwasher is connected to a working drain and that the pump is running.
If the dishwasher doesn’t wash dishes correctly, you’ll see an E4 error code. This code means that there is a problem with the water level or the dishwasher isn’t getting enough water. Check to make sure the dishwasher is connected to a working water supply and that the water is turned on.
If the dishwasher smells bad, you’ll see an E5 error code. This code means that there is a problem with the water heater. Check to make sure the dishwasher is connected to a working water supply and that the water is turned on.
If the dishwasher is leaking water, you’ll see an E6 error code. This code means that there is a problem with the water inlet valve. Check to make sure the valve is connected to a working water supply and that the water is turned on.
If the dishwasher makes a loud noise, you’ll see an E7 error code. This code means that there is a problem with the motor. Check to make sure the dishwasher is connected to a working power supply and that the motor is running.
If the dishwasher has a water leak, you’ll see an E8 error code. This code means that there is a problem with the water inlet valve. Check to make sure the valve is connected to a working water supply and that the water is turned on.
If the dishwasher is overfilled, you’ll see an E9 error code. This code means that there is a problem with the water level or the dishwasher isn’t getting enough water. Check to make sure the dishwasher is connected to a working water supply and that the water is turned on.
If you see any other error code, refer to the user manual for more information.
Once you’ve identified the problem, there are a few things you can do to fix it. If there’s a problem with the water supply, make sure the dishwasher is connected to a working water supply and that the water is turned on. If there’s a problem with the water inlet valve, check to make sure the valve is connected to a working water supply and that the water is turned on. If there’s a problem with the drain pump, check to make sure the dishwasher is connected to a working drain and that the pump is running
Why is my Fisher and Paykel DishDrawer beeping?
If you are experiencing a loud beeping noise from your Fisher and Paykel DishDrawer, there are a few things you can check to try and resolve the issue.
The first thing you should check is whether there is any obstruction in the dishwasher that is causing the beeping. Remove any items from the dishwasher that may be blocking the spray arm or the dishwasher door.
If there is no obstruction, the next thing to check is the water level. The dishwasher may be beeping because it is not getting enough water. Check to make sure the dishwasher is properly connected to the water supply and that the water is turned on.
If the water level is correct and there is no obstruction, the dishwasher may be beeping because it is overloaded. Try removing some of the dishes from the dishwasher and see if the beeping stops.
If the beeping continues even after checking these things, you may need to call a technician to have the dishwasher serviced.
How do I reset my Fisher and Paykel DishDrawer?
To reset your Fisher and Paykel DishDrawer, you will need to unplug the appliance for five minutes. After five minutes have passed, plug the dishwasher back in and press the power button. A reset will be performed and the dishwasher will be ready to use.
How do I fix f1 error on Fisher and Paykel DishDrawer?
If you’re experiencing an F1 error on your Fisher and Paykel DishDrawer, don’t worry – it’s a relatively easy fix. Here are the steps you need to take:
1. Unplug the DishDrawer from the wall.
2. Remove the drawer.
3. Locate the silver service panel on the back of the DishDrawer.
4. Remove the screws that hold the panel in place.
5. Locate the F1 error code.
6. Refer to the manual that came with your DishDrawer to determine the cause of the F1 error.
7. Repair the issue.
8. Replace the service panel.
9. Plug the DishDrawer back in.
10. Test the DishDrawer to make sure it’s working properly.
How do you troubleshoot a Fisher Paykel washing machine?
If you’re having problems with your Fisher Paykel washing machine, don’t worry – it’s usually easy to troubleshoot and fix. In this article, we’ll outline some common problems and their solutions.
One of the most common problems with Fisher Paykel washing machines is that they don’t seem to be draining properly. If this is the case, check to make sure that the drain hose is connected properly and that the drain is clear. If it’s still not draining properly, you may need to clean the filter.
Another common issue is that the machine doesn’t seem to be washing properly. In this case, you should check to make sure that the water is getting into the machine properly. If it’s not, you may need to check the filters or the hoses. You may also need to adjust the water level or the wash time.
If you’re having any other problems with your Fisher Paykel washing machine, please feel free to contact us for assistance.
How do I reset my Fisher Paykel washing machine?
If you need to reset your Fisher Paykel washing machine, you can do so by following these instructions:
1. Unplug the machine from the power outlet.
2. Wait for a minute.
3. Plug the machine back in.
4. Press and hold the power button for 10 seconds.
5. The machine will reset and start up again.
How do you run a diagnostic on a Fisher Paykel dishwasher?
If your Fisher Paykel dishwasher is not working correctly, you may need to run a diagnostic on it to determine the problem. With a few simple steps, you can have your dishwasher back up and running in no time.
The first step is to make sure that your dishwasher is plugged in and that the power is turned on. Next, open the dishwasher door and locate the Console. The Console is the panel on the front of the dishwasher that has the buttons and displays on it.
Press and hold the Power button for two seconds to turn on the dishwasher. Once the dishwasher is on, press and hold the Rinse button for two seconds. The dishwasher will start to run a diagnostic test.
The diagnostic test will run through a series of different tests to determine the problem. Once the test is complete, the dishwasher will turn off. The results of the diagnostic test will be displayed on the Console.
If the diagnostic test finds a problem, the dishwasher will provide you with a code that will help you to identify the problem. You can find a list of the diagnostic codes and their meanings in your dishwasher’s user manual.
If the diagnostic test does not find a problem, the dishwasher will provide you with a code that will indicate that the dishwasher is working correctly.
If you need to run a diagnostic test on your dishwasher, but don’t have the user manual, you can find a copy of it on Fisher Paykel’s website.