If your GE washer is displaying an error code, it’s important to troubleshoot and fix the issue as soon as possible. Here are some of the most common GE washer motor error codes, and how to fix them:
E1: This code indicates a problem with the motor. Check the wiring and connections, and replace the motor if necessary.
E2: This code indicates a problem with the motor control board. Replace the board if necessary.
E3: This code indicates a problem with the motor capacitor. Replace the capacitor if necessary.
E4: This code indicates a problem with the motor winding. Replace the motor if necessary.
E5: This code indicates a problem with the motor relay. Replace the relay if necessary.
E6: This code indicates a problem with the motor start switch. Replace the switch if necessary.
E7: This code indicates a problem with the motor brake. Replace the brake if necessary.
E8: This code indicates a problem with the motor speed sensor. Replace the sensor if necessary.
E9: This code indicates a problem with the motor control circuit. Replace the control circuit if necessary.
If your GE washer is displaying any of these error codes, troubleshoot and fix the issue as soon as possible.
Contents
- 1 What are the codes on a GE washing machine?
- 2 How do I find the error code on my GE washer?
- 3 How do you check a GE washer motor?
- 4 How do you reset a GE washer motor?
- 5 Why is my GE washer not draining or spinning?
- 6 How do you reset the motor on a GE washer?
- 7 What causes a GE washing machine not to spin?
What are the codes on a GE washing machine?
If you’re experiencing problems with your GE washing machine, you may be able to troubleshoot it by deciphering the codes it displays. Here are some of the most common codes and their meanings:
“F” or “E1” – This code indicates a problem with the water inlet.
“F” or “E2” – This code indicates a problem with the water level.
“F” or “E3” – This code indicates a problem with the water temperature.
“F” or “E4” – This code indicates a problem with the drainage.
“F” or “E5” – This code indicates a problem with the motor.
“F” or “E6” – This code indicates a problem with the timer.
“F” or “E7” – This code indicates a problem with the electronic control.
“F” or “E8” – This code indicates a problem with the communication.
If your GE washing machine displays one of these codes, you should be able to find the source of the problem and fix it yourself. However, if you’re not comfortable doing this or if the code persists even after you’ve tried to fix it, you may need to call in a professional.
How do I find the error code on my GE washer?
When your GE washer isn’t working right, it’s important to be able to find the error code and diagnose the issue. Here’s how to do it:
First, locate the error code on your washer. On most models, it will be a three-digit number displayed in red on the control panel.
Next, determine the cause of the error. There are many different error codes, and each one corresponds to a specific problem. You can find a list of GE washer error codes and their corresponding problems on the GE website.
Finally, take corrective action. Once you know the cause of the error, you can take steps to fix it. For example, if you see an error code of E01, you would need to check the water inlet valve.
If you’re not sure what to do, or if the problem is too complex to fix on your own, you can always call a repair technician.
How do you check a GE washer motor?
When your GE washer isn’t spinning or washing clothes correctly, the motor may be the issue. You can test the motor to see if it’s the problem.
To test the motor, unplug the washer and remove the back panel. There are three connectors on the motor. Disconnect each one and test for continuity with a multimeter. There should be continuity between each connector and the motor casing. If there is no continuity, the motor is bad and needs to be replaced.
How do you reset a GE washer motor?
If your GE washer motor is not working, you may need to reset it. To do this, you will need to unplug the washer and remove the back panel. Once you have done this, you will need to locate the motor. Once you have located the motor, you will need to remove the wires from the terminals. Once you have done this, you will need to twist the terminals together and then reattach the wires. Once you have done this, you will need to reattach the back panel and plug in the washer.
Why is my GE washer not draining or spinning?
If your GE washer is not draining or spinning, there are a few possible causes. The first thing you should do is check to make sure that the washer is plugged in and that the circuit breaker has not been tripped. If it is plugged in and the breaker is not tripped, there are a few other things you can check.
The first possibility is that the pump is not working. To test the pump, unplug the washer and remove the cover. There is a pump motor at the bottom of the washer. Use a screwdriver to short the two terminals on the motor. If the pump motor runs, the problem is most likely the pump impeller or the pump seal. If the pump motor does not run, the problem is most likely the pump motor.
The second possibility is that the motor is not working. To test the motor, unplug the washer and remove the cover. There is a motor at the top of the washer. Use a screwdriver to short the two terminals on the motor. If the motor runs, the problem is most likely the motor windings. If the motor does not run, the problem is most likely the motor bearings.
The third possibility is that the timer is not working. To test the timer, unplug the washer and remove the cover. There is a timer on the front of the washer. Use a screwdriver to short the two terminals on the timer. If the timer runs, the problem is most likely the timer contacts. If the timer does not run, the problem is most likely the timer motor.
The fourth possibility is that the lid switch is not working. To test the lid switch, unplug the washer and remove the cover. There is a lid switch on the top of the washer. Use a screwdriver to short the two terminals on the lid switch. If the lid switch runs, the problem is most likely the lid switch contacts. If the lid switch does not run, the problem is most likely the lid switch motor.
The fifth possibility is that the water inlet valve is not working. To test the water inlet valve, unplug the washer and remove the cover. There is a water inlet valve on the back of the washer. Use a screwdriver to short the two terminals on the water inlet valve. If the water inlet valve runs, the problem is most likely the water inlet valve solenoid. If the water inlet valve does not run, the problem is most likely the water inlet valve coil.
The sixth possibility is that the water level switch is not working. To test the water level switch, unplug the washer and remove the cover. There is a water level switch on the right side of the washer. Use a screwdriver to short the two terminals on the water level switch. If the water level switch runs, the problem is most likely the water level switch contacts. If the water level switch does not run, the problem is most likely the water level switch motor.
The seventh possibility is that the belt is not working. To test the belt, unplug the washer and remove the cover. There is a belt on the bottom of the washer. Use a screwdriver to short the two terminals on the belt. If the belt runs, the problem is most likely the belt. If the belt does not run, the problem is most likely the belt tensioner.
The eighth possibility is that the motor coupling is not working. To test the motor coupling, unplug the washer and remove the cover. There is a motor coupling on the bottom
How do you reset the motor on a GE washer?
Resetting the motor on a GE washer is a fairly simple process. You will need to make sure that the washer is unplugged from the wall, and then locate the reset button on the motor. You can then use a pen or a paper clip to push the button, and the motor will reset. Once the motor has been reset, you can plug the washer back in and it will be ready to use.
What causes a GE washing machine not to spin?
There can be a number of reasons why a GE washing machine will not spin. The machine could be unplugged, the door may not be closed properly, the load may be too heavy, or there could be a problem with the motor.
If the machine is unplugged, make sure that it is plugged in securely and that the outlet is working. If the machine is plugged in and still not spinning, check to make sure that the door is closed properly.
If the machine is not spinning because the load is too heavy, try redistributing the clothes so that the load is more evenly distributed.
If the machine is not spinning because of a problem with the motor, the motor may need to be replaced.